The tools you need:

  • Iron or heat press

  • Iron-on Transfer Pencil

  • Fabric

  • Printer (If your original pattern is drawn by hand, you don't need a printer, but you'll need to trace it again using an iron-on transfer pencil)

  • Light pad or natural light

 

There are different ways to transfer a pattern onto fabric. Here, I will share my method for tracing a pattern on fabric. You are welcome to use the method you prefer.

 

1. I am using an iron-on transfer pencil and a light pad to trace the pattern.

2. I am cutting the paper into smaller sizes to make it easier for me to arrange the space on the fabric.

 

3. I am measuring the size of the fabric that I will be working on.

4. I am preparing my heat press and mat, and I am ready to transfer the pattern.

5. Set the timer and temperature. Note: If the temperature is high and the time is long, the fabric may turn yellow after pressing. However, don't worry too much if you are making a coaster or a rug, as you can cut and hide the affected fabric. If you are using an iron to press, start with 40 seconds and check if the transfer has occurred. If not, you can add more time. Each iron is different, so it's best to test it out and determine the appropriate time needed